Version 29 (modified by 22 months ago) (diff) | ,
---|

# PDAF-OMI, the Observation Module Infrastructure

#### PDAF-OMI Guide

#### Contents of this page

PDAF-OMI (Observation Module Infrastructure) is an extension to PDAF for a structured modular implementation of the call-back routines handling observations for PDAF. It was introduced with PDAF V1.16.

Compared to the classical variant to implement observations with PDAF, OMI is designed with **two main aims**

**reduce the coding effort**for implementing the support for an observation type, its corresponding observation operator, and localization.**simplify the implementation of complex cases**in which several different observation types are assimilated by clearly separating each observation type

To guarantee that each observation type (like sea surface temperature data from some satellite sensor, or altimetry data) is handled indenpendently from the others one implements with OMI one Fortran module for each observation type. Thus, different developers can implement observation types without interfering with the implementations by others.

To reduce the coding effort only four routines need to be implemented for an observation type:

**init_dim_obs**

Reads observations from a file and initialize the information describing the observations**obs_op**

Calls an observation operator routine**init_dim_obs_l**

Calls a generic routine to initialize local observations (only required for domain-localized filters like LETKF and LESTKF)**localize_covar**

Calls a generic routine to apply covariance localization (only required for the localized EnKF)

The only 'real' coding effort will be in `init_dim_obs`

because the other routines merely call a routine provided by PDAF-OMI. All functionality needed during the analyis step bases on variables that are initialized by these routines and is provided by PDAF-OMI.

## Main Components of OMI

The main components of OMI are

**Observation Modules**

One observation-specific Fortran module for each observation type**callback_obs_pdafomi.F90**

The observation-specific call-back routines are merely pass-through routines without own functionality. They are collected into this single file for compactness.**PDAF-OMI core routines**

These routines are part of the PDAF library and provide functionality for observation handling, localization, and observation operators

Figure 1 shows the call structure for the analysis step with PDAF-OMI. For the analysis step, the core routines of PDAF (green) call different user-provided call-back functions. Some of these routines, like those performing state localization, that are not related to observations (blue). PDAF-OMI is concerned with the routines related to observations (red and purple).

**Figure 1:** Call-structure of PDAF with OMI: (green) PDAF library with core and omi; (blue) call-back routines; (red) OMI call-back routines; (purple) observation-specific modules.

With OMI, the functionality to handle observations is included in generic routines and observation-specific modules (obs_*_pdafomi in the third column in Fig. 1, denoted obs-module below). Most routines for the observation handling are generic with OMI and included in PDAF so that only three to four routines with observation specific operations need to be implemented. There is one obs-module per observation type with collects these routines. For example, one can have one obs-module for the satellite sea surface temperature from one data provider and another one for sea level anomaly data. Important is that each of these obs-modules, which are further described below, is independent from the others. This allows us to switch between different combinations of observations ensuring that their implementations don’t interfere.

Since the actual operations are performed in the obs-modules obs_*_pdafomi, the remaining call-back routines (init_dim_obs, obs_op, init_dim_obs_l, localize_covar) are reduced to pass-through routines. Thus, each of these routines contains only calls to one observation-specific routine from each obs-module. There is, in addition, one routine for deallocating the observation-related arrays which calls a generic PDAF-OMI routine for each observation type.

Because the call-back routines become very compact by this change, they are collected into the file `callback_obs_pdafomi.F90`

. This is mainly for convenience, because all these routines are now ‘in one place’. Thus, when adding a new observation type only a new subroutine call has to be added to each of the routines in this file. (Note, that callback_obs_pdafomi.F90 does not define a Fortran module. This is because the call-back routines of PDAF are not contained in a module as this would require to compile the module together with the PDAF core so that the PDAF core would no longer be generic.)

Each obs-module contains four routines:

`init_dim_obs`

initializes all variables holding the information about one observation type.`obs_op`

applies the observation operator to a state vector. One can call an observation operator routine provided by PDAF, or one can to implement a new operator.`init_dim_obs_l`

calls a PDAF-OMI routine to initialize the observation information corresponding to a local analysis domain. One can set localization parameters, like the localization radius, for each observation type.`localize_covar`

calls a PDAF-OMI routine to apply covariance localization. One can set localization parameters, liek the localization radius, for each observation type.

For each observation type, PDAF-OMI uses a data structure (Fortran 'type') that is initialized in `init_dim_obs`

in the obs-module. The set of routines in `callback_obs_pdafomi.F90`

provide the observation handling for all filters and smoothers provided by PDAF. Thus, once the routines in an obs-module are implemented for a particular observation and the subroutine calls in `callback_obs_pdafomi.F90`

for this observation type are inserted, one can use each of the provided assimilation methods.

Note that `init_dim_obs_l`

is only required if one plans to use domain-localized filters like LESTKF, LETKF or LNETF. Likewise, `localize_covar`

is only required if on likes to use the loalized EnKF (LEnKF).

## Further documentation of PDAF-OMI

The documentation for implementing is provided on the following pages:

- The file callback_obs_pdafomi.F90
- The Observation Modules
- Observation Operators
- Debugging Functionality
- Implementing the analysis step with OMI
- Porting an existing implementation to OMI
- Using domain-limited observations

## Implementation examples

From PDAF V1.16, the PDAF package provides several implementation examples:

**/tutorial/online_2D_serialmodel**

This implementation includes three obs-modules. The two modules`obs_A_pdafomi.F90`

and`obs_B_pdafomi.F90`

are for observation at grid points, while`obs_C_pdafomi.F90`

uses an observation operator with bi-linear interpolation. In this case we have only implemented support for the global and the domain-localized filters, but not the LEnKF (see /models/lorenz96_omi for the example supporting all filters)**/tutorial/online_2D_parallelmodel**

This implementation includes two obs-modules (`obs_A_pdafomi.F90`

,`obs_B_pdafomi.F90`

) for observations at grid points. One can compare these modules with those in online_2D_serialmodel_omi to see differences in the case of a serial model to those in a parallel model**/models/lorenz96_omi**

This implementation uses one obs-module for observations at grid points. The implementation supports all filters that are available in PDAF. This variant uses the flexible parallelization variant (PDAF_put_state_X).

## Some Known Limitations

The current version of PDAF-OMI has a few limitations

- OMI currently only supports diagonal observation error covariance matrices (though, the observation variances can vary).
- OMI currently only includes observation operators with linear interpolation.
- We have not tested interoperability with other programming languages. Generally Fortran derived data types and C structs should be compatible. Obviously, taking the Fortran routines and calling C functions to perform the actual initializations will work.